4GEE WiFi

Got a problem with your 4GEE WiFi? Try our interactive diagnostic tool or book a repair if you can’t fix it.

The box contains:

• 4GEE WiFi
• USB cable
• Quick start guide

Quick start guide

Find out how to view the device information.

• Connect the device to the PC via the USB cable or WiFi connection.
• Launch a web browser and in the address bar, enter http://192.168.1.1/
   then click the arrow icon or press Enter.
• Enter the required username and password, then click OK.
• Click System under the Settings tab.

The device information has been displayed.

Find out how to change the WiFi network name and password on your device

• Connect the device to the PC via the USB cable.
• Launch a web browser and in the address bar, enter http://192.168.1.1/
   then click the arrow icon or press Enter.
• From the home page, click log in here to access settings.
• Enter the required username and password, then click OK.
• Click WiFi Setting under the Quick Setup tab.
• Click the SSID field, then enter the required hotspot name.
• Click the Security dropdown.
• Click the desired security type (e.g. WPA2 PSK).
• Click the Key field, then enter the required password.
• Note: To view the password, tick Show Password tickbox.
• Click Apply or Save.
• If prompted, click OK.
  

The WiFi network name and password have been changed, and the device has been set up as a WiFi hotspot.

Find out how to set the device to connect to the internet automatically.

• Connect the device to the PC via the USB cable or WiFi connection.
• Launch a web browser and in the address bar, enter http://192.168.1.1/
   then click the arrow icon or press Enter.
• From the home page, click log in here to access settings.
• Enter the required username and password, then click OK.
• Click Connection Mode under the Connection tab.
• Select Automatic from the drop down list.
• Click Save.
  

The device will automatically connect to the Internet when switched on

A Service Set Identifier (SSID) is the wireless network name broadcast by your Osprey 2 Mini. Having SSID broadcast disabled essentially makes your Access Point ‘invisible’ to devices trying to connect to a wireless network unless it already knows the SSID.

Find out how to enable or disable the SSID Broadcast.

1. Connect the device to the PC via the USB cable.
2. Launch a web browser and in the address bar, enter http://192.168.1.1/
    then click the arrow icon or press Enter.
3. Enter the required username and password, then click OK.
4. Click the SSID Broadcast dropdown box.
5. Click Enable or Disable.
6. Click Apply.
7. Click OK.

The SSID Broadcast has been enabled or disabled.

Find out how to perform a master reset of your device.

Perform master reset via hardware:

1. Remove the bumper to uncover the Reset button.
2. Using a paperclip or pen, press and hold the Reset button for approximately 5 seconds.
3. The device will restart automatically.

Perform master reset via software:

1. Connect the device to the PC via the USB cable.
2. Launch a web browser and in the address bar, enter http://192.168.1.1/
    then click the arrow icon or press Enter.
3. From the home page, click log in here to access settings.
4. Enter the required username and password, then click OK.
5. Click System under the Settings tab.
6. Click Reset.
7. Click OK.

Note: Performing master reset will delete all personal configuration settings and will also restore the web-based management settings to their default values.

The factory default settings have been restored.